Immersion depth: 500 mm (sealless)
For low viscosity media
e.g. battery acid, ammonia water, photo developer/fixer, glycols, phosphoric acid, hydrochloric acid and hydrogen peroxide
Properties:
- Small to medium filling quantities
- Low power
- Low viscosity < 200 mPas
- Lower pressure/volume flow
- Low density < 1.3 kg/dm³
- Automatic switch-off on overload
- Exchangeable battery with Li-Ion technology
- Stepless control for all requirements
- Good handling due to compact design and very low weight
- Wear-free, particularly low-noise BLDC motor
- Easy disassembly due to quick release fastener
Advantages:
- BLDC motor with high efficiency of up to 70
- Continuously adjustable
- Modular design
- Low weight
- Long battery life
- Long service life
- Low volume ≤ 70 dBA
- Mature quick release fastener
- Available in polypropylene, polyvinylidene fluoride and stainless steel (1.4571)
Consisting of:
Motor B2 Battery, pump station PVDF 32-R DL in polyvinylidene fluoride (battery and charger not included)
Suitable media: | Natriumhypochlorit, Chlorsäure, Flusssäure, Salpetersäure, Schwefelsäure, Chromsäure |
Pump station material (material): | PVDF (polyvinylidene fluoride) |
Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
Mechanical seal (material): | no seals in contact with the medium |
Static seal (material): | no seals in contact with the medium |
Drive shaft (material): | Hastelloy C (2.4610) |
Bearing (material): | ETFE / PTFE |
Delivery rate (up to max. l/min)*: | 80 |
Delivery head (up to max. mWS)*: | 8 |
Fluid temperature (max °C): | 90 |
density (up to kg/dm³): | 1.6 |
Viscosity (up to mPas): | 400 |
Immersion length (mm): | up to 500 mm, from 500 mm, from 1000 mm |
Immersion tube diameter (up to mm): | 32 |
Conveyor wheel shape / drive type: | Axial-flow rotor |
Seal type: | Sealless (SL) |
Thread (inch) outside: | 1" |
Type of drive: | Battery |
Output (W): | 260 |
Voltage (V): | 21,6 |
Capacity (Ah): | 4 |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler