Drum pump - solvent

for highly flammable hydrocarbons

Order number: 0205-475
Maße (mm): upon request
Info: is suitable for the Ex - area

Description: Drum pump is suitable for low viscosity, flammable and combustible...more

Close menu

Product information "Drum pump - solvent"

Motor: MD2xL - 1000W, 6 bar, comfort handle (for higher flow rate, viscosity and density)
Immersion depth : 1000 mm (sealless)

Description:

Drum pump is suitable for low viscosity, flammable and combustible hydrocarbons. Perfectly suitable for the withdrawal or decanting of solvents.

optionally available with Ex - plug
Pumping unit equipped with Lutz original hand wheel
suitable for filling or transferring alternative fuels, oils, flammable liquids

Features & Advantages

optionally with electric or compressed air drive
no lubricants and therefore no contamination of the pumped medium by lubricants
highly resistant noble carbon shaft bearings
Maintenance without special tools
Seal modules of the seal-less (DL) pump replaceable
approved according to ATEX directive 2014/34/EU, category 1/2

Technische Produktdaten

Suitable media:

Styrol, Isopropanol, Benzin, Ethanol, Essigsäure, Ameisensäure, Kerosin, Methanol, Petroleum, Butanol, Aceton, Butylacetat, Toluol, Nikotin, Äththylacetat

Pump station material (material):

Niro (Edelstahl)

Impeller (material):

ETFE (ethylene-tetrafluorethylene copolymer)

Static seal (material):

no seals in contact with the medium

Mechanical seal (material):

no seals in contact with the medium

Bearing (material):

Edelkohle

Drive shaft (material):

Edelstahl (1.4571)

Delivery rate (up to max. l/min)*:

124

Delivery head (up to max. mWS)*:

Fluid temperature (max °C):

100

density (up to kg/dm³):

2.8

Operating pressure (max. bar):

lower than 6 bar

Viscosity (up to mPas):

1000

Conveyor wheel shape / drive type:

Radial-flow impeller

Seal type:

Sealless (SL)

Immersion length (mm):

from 1000 mm

Immersion tube diameter (up to mm):

Thread (inch) outside:

1 1/4"

Explosion protection:

Yes

Type of drive:

Compressed air

Output (W):

1000

Voltage (V):

230

Frequency (Hz):

Protection type:

IP54

Version:

Komfortgriff

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter