PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
MRC Global Belgium | Lutz Pompen
Family business since 1954
frederick.lippens@mrcglobal.com
+32 3 633 96 13

Pump Set for residual emptying - solvent

for highly flammable hydrocarbons

Immersion depth:

Motor:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 0205-501
  • upon request
  • is suitable for the Ex - area
Description: The Pump Set is suitable for low viscosity, flammable and combustible...more
Product information "Pump Set for residual emptying - solvent"

Motor: ME II 3 - 460W, 230V
Immersion depth: 1000 mm (sealless)


with motor ME II 3 (Ex) with undervoltage release, immersion depth: 1000 mm (with mechanical seal)
Suitable for 200l drum emptying Undervoltage release
prevents unexpected start-up of the pump after power failure
.

Recommended when pumping hazardous liquids.


Description:

The Pump Set is suitable for low viscosity, flammable and combustible hydrocarbons. Perfectly suited for the removal or decanting of solvents.

  • Media examples: Ethanol, gasoline, butanol, isopropanol, kerosene, methanol and petroleum.etc.
  • Pump tube equipped with Lutz original hand wheel
  • Suitable for Drum emptying alternative fuels, oils, flammable liquids

Features & Advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped medium by lubricants
  • Optimized Drum emptying with remaining quantity of approx. 0.1 litres
  • No leakage in case of inclined position or repositioning of the pumping unit
  • Maximum product utilisation with reduced drum cleaning and disposal costs
  • Approved according to ATEX directive 2014/34/EU, category 1/2
Technische Produktdaten
▼ MEDIUM ▼
Suitable media: Petroleum, Methanol, Kerosin, Isopropanol, Butanol, Ethanol
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump station material (material): Niro (Edelstahl)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): FEP ummantelt
Mechanical seal (material): Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571)
Bearing (material): Edelkohle
Drive shaft (material): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Delivery rate (up to max. l/min)*: 77
Delivery rate with Nozzle (up to max. l/min)*: 45
Delivery head (up to max. mWS)*: 14
Fluid temperature (max °C): 100
density (up to kg/dm³): 1.6
Operating pressure (max. bar): lower than 6 bar
Viscosity (up to mPas): 500
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Conveyor wheel shape / drive type: Radial-flow impeller
Seal type: Mechanical seal (MS)
Immersion length (mm): from 1000 mm
Immersion tube diameter (up to mm): 41
Thread (inch) outside: 1 1/4"
▼ SCHLAUCH | HOSE | SLANG ▼
Schlauchlänge (mm): 2000
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Explosion protection: Yes
Type of drive: Electric
Output (W): 460
Voltage (V): 230
Frequency (Hz): 50
Protection type: IP54
Version: mit Unterspannungsauslöser

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Ex-protection
Electrical
Complete set
Pump Set for residual discharge - Explosive media Pump Set for residual discharge - Explosive media
for aggressive and highly flammable liquids
Service & Support

Sie brauchen Hilfe?

Hier finden Sie alle Möglichkeiten mit uns in Kontakt zu treten:

  +49 9342 879-0 (Zentrale)
  +49 9342 879-260 (Vertrieb)
  +49 9342 879-232 (After-Sales)

  Kontaktformular
  Angebot anfordern
  Reparatur-Service

  info@lutz-pumpen.de
  bewerbung@lutz-pumpen.de