
Werkstoff: Polypropylen (PP)
Werkstoff der Membrane / Ventilkugeln / Dichtungen: PTFE / PTFE / PTFE
Hinweis: Die Pumpentypen DMP 1 1/2" PPT PP/PTFE und DMP 1 1/2" KNT PVDF/PTFE sind auch in der Pure-Ausführung lieferbar. Die Pumpen werden insbesondere in der Lebensmittel- und Kosmetikindustrie sowie Pharmazie eingesetzt.
Ausführung Pure:
Pumpentyp | Werkstoffe | Bestell-Nr. | ||
---|---|---|---|---|
Membrane | Ventile | Dichtungen | ||
Mehrpreis DMP 1 1/2" PPT PP/PTFE PURE | PTFE | PTFE | PTFE | 5000-642 |
*Bitte Bestell-Nr. Basispumpe + Bestell-Nr. PURE-Mehrpreis wählen
Suitable for handling neutral and aggressive liquids
Application examples:
Suitable for filter presses, tank cleaning systems, pigments and resins.
Features:
- Absolutely oil-free valve technology
- Absolutely safe to run dry
- Self-priming, even dry
- Centre block made of corrosion-free plastic
- Just a few components, easily accessible
- Flow rate up to 492 l/min
Benefits:
- No failure of the pump due to lack of lubrication
- No contamination of the environment or of the product itself by oil vapour
- Gentle pumping of thick-bodied, contaminated and abrasive liquids
- Flow rate and flow pressure can be infinitely varied
- No wear prone dynamic seals
- No direct chemical attack of the air-conducting parts in case of membrane rupture
- Easy maintenance without special tools
Housing (material): | PP (polypropylene), PVDF (polyvinylidene fluoride) |
Seals (material): | PTFE (polyvinylidene fluoride), NBR (nitrile butadiene rubber), EPDM (ethylene-propylene-diene monomer) |
Valve seat (material): | PP (polypropylene), PVDF (polyvinylidene fluoride) |
Valve ball (material): | PTFE (Polyvinylidenfluorid), TPV (NBR-PP) = NBR/PP-Compound, TPV (EPDM-PP) = EPDM/PP-Compound |
Diaphragms (material): | PTFE (polyvinylidene fluoride), TPV (NBR-PP) = NBR/PP-Compound, TPV (EPDM-PP) = EPDM/PP-Compound |
Delivery rate (up to max. l/min)*: | 492 |
Fluid temperature (max °C): | 66, 93 |
Operating pressure (max. bar): | 8,2 |
Viscosity (up to mPas): | 20,000 (e.g. honey) |
Solids (max. ø mm): | 6,4 |
Suction lift dry (in m): | 3, 4,5 |
Operating pressure (max. bar): | 8,2 |
Lufteinlass (Zoll) innen: | 3/4" |
Druckstutzen (DN): | 40 |
Luftauslass (Zoll) innen: | 3/4" |
Saugstutzen (DN) : | 40 |
Type: | DMP 1 1/2" PPB PP/TPV (NBR-PP), DMP 1 1/2" PPT PP/PTFE, DMP 1 1/2" PPE PP/TPV (EPDM-PP), DMP 1 1/2" KNE PVDF/TPV (EPDM-PP), DMP 1 1/2" KNT PVDF/PTFE |
Version: | Bolted version |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler