Material: Stainless steel (electropolished)
Material of diaphragm / check balls / seals: TPV (EPDM-PP) + TFM (PTFE) / PTFE / PTFE
Centre block material: Aluminium (food paintwork)
Description of material: EPDM = ethylene propylene diene rubber, FPM = fluorine rubber,
NBR = acrylonitrile butadiene rubber, PP = polypropylene, PTFE = polytetrafluoroethylene,
TPC-ET + TFM (PTFE) = thermoplastic polyester elastomer + modified polytetrafluoroethylene,
TPV (EPDM-PP) = EPDM/PP compound
Description:
The double diaphragm pump is suitable for the food and pharmaceutical industry as well as for large flow rates and higher viscosities.
- typical applications: liquid foodstuffs and semi-luxury food, pharmaceutical substances and cosmetic products
- integrated muffler up to model size AODD 1"
- FDA-compliant
Features & Benefits
- high hydraulic performance
- maintenance-optimised design and simple installation
- self-priming (even when dry)
- ice-free air system
- non-stalling operation
- food-safe connections
Doppelmembranpumpen (Werkstoff): | Metall |
Mittelblock (Werkstoff): | Aluminium (Lebensmittellackierung) |
Housing (material): | Stainless Steel |
Diaphragms (material): | TPV (EPDM-PP) + TFM (PTFE) (EPDM/PP-Compound + Modifiziertes Polytetrafluorethylen) |
Valve ball (material): | PTFE (Polytetrafluorethylen) |
Seals (material): | PTFE (polyvinylidene fluoride) |
Valve seat (material): | Stainless steel |
Delivery rate (up to max. l/min)*: | 370 |
Delivery head (up to max. mWS)*: | 80 |
Solids (max. ø mm): | 7 |
Fluid temperature (max °C): | 100 |
Viscosity (up to mPas): | 30,000 (e.g. jam) |
Ansaughöhe trocken (bis max. mWS*): | 4,5 |
Luftdruck (max. bar): | 8 |
Luftdruck Anlauf (min. bar): | 2 |
Schalldruckpegel ( in dB(A)): | 80 |
Verdrängung pro Kammer ( in cm³): | 670 |
Verdrängung pro Zyklus ( in cm³): | 1340 |
Size: | 1 1/2" |
Lufteinlass (Zoll) innen: | 1/2" |
Druckstutzen (Zoll) innen: | Tri-Clamp 2 |
Saugstutzen (Zoll) innen: | Tri-Clamp 2 |
Anschluss: | Tri-Clamp |
Certification: | FDA Zulassung, ATEX Richtlinie (ATEX Richtlinie 2014/34/EU) |
Type: | DMP 1 1/2" SST PURE SS/PTFE |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler