Motor: MA II 3 - 460W, 230V
Immersion depth: 1000 mm (sealless)
For concentrated acids and alkalis
e.g. chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid, sodium hypochlorite, etc.
Properties:
- No grease filling in the pumping station
- Optimized drum emptying
- Modular, service-friendly design
- With radial impeller = L (impeller) for higher heads
Advantages:
- No contamination of the pumped medium by lubricants
- Universally resistant PTFE shaft bearing
- Maintenance without special tools
- Seal modules of the seal-less pump are interchangeable.
Drum pump consisting of:
Motor, pumping station PVDF 41-L-DL, hose connection PVDF 3/4".
Suitable media: | Natriumhypochlorit, Flusssäure, Salpetersäure, Schwefelsäure, Chromsäure, Chlorsäure |
Pump station material (material): | PVDF (polyvinylidene fluoride) |
Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
Mechanical seal (material): | no seals in contact with the medium |
Static seal (material): | no seals in contact with the medium |
Drive shaft (material): | Hastelloy C (2.4610) |
Bearing (material): | ETFE / PTFE |
Delivery rate (up to max. l/min)*: | 78, 83 |
Delivery head (up to max. mWS)*: | 16, 17 |
Fluid temperature (max °C): | 100 |
density (up to kg/dm³): | 1.6, 1.8 |
Viscosity (up to mPas): | 500 (e.g. hydraulic oil), 800 |
Immersion length (mm): | from 1000 mm, from 1500 mm |
Immersion tube diameter (up to mm): | 41 |
Conveyor wheel shape / drive type: | Radial-flow impeller |
Seal type: | Sealless (SL) |
Thread (inch) outside: | 1 1/4" |
Type of drive: | Electric |
Output (W): | 460, 575 |
Voltage (V): | 230 |
Frequency (Hz): | 50 |
Protection type: | IP54 |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler