Immersion depth: 1000 mm (sealless)
For concentrated acids and alkalis
e.g. chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite.
properties:
- Medium to large filling quantities
- Extremely high performance at low weight
- Higher viscosity up to max. 400 mPas
- Higher pressure/flow rates
- Higher density up to max. 1.6 kg/dm³
- Longer battery life
- Automatic switch-off on overload
- Exchangeable, powerful battery with Li-Ion technology
- Infinitely variable control for all requirements
- Good handling due to comfortable carrying handle, compact design and low weight
- Wear-free, low-noise BLDC motor: Extremely high performance at low weight
- Easy disassembly due to quick release fastener
Advantages:
- BLDC motor with high efficiency of up to 70
- Continuously adjustable
- Modular design
- Low weight
- High battery life
- Long service life
- Low volume ≤ 70 dBA
- Mature quick release fastener
- Available in polypropylene, polyvinylidene fluoride and stainless steel (1.4571)
Consisting of:
Battery motor B2 Battery, pumping station PVDF 32-R DL in polyvinylidene fluoride, flow meter TR3-PVDF, 1.5 m special chemical hose 3/4", hose clamps, Lutz nozzle PVDF (battery and charger not included)
Suitable media: | Natriumhypochlorit, Chromsäure, Flusssäure, Chlorsäure, Salpetersäure, Schwefelsäure |
Pump station material (material): | PVDF (polyvinylidene fluoride) |
Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
Mechanical seal (material): | no seals in contact with the medium |
Static seal (material): | no seals in contact with the medium |
Drive shaft (material): | Hastelloy C (2.4610) |
Bearing (material): | ETFE / PTFE |
Delivery rate (up to max. l/min)*: | 80 |
Delivery rate with Nozzle (up to max. l/min)*: | 45 |
Delivery head (up to max. mWS)*: | 8 |
Fluid temperature (max °C): | 90 |
density (up to kg/dm³): | 1.6 |
Viscosity (up to mPas): | 400 |
Immersion length (mm): | from 1000 mm |
Immersion tube diameter (up to mm): | 32 |
Conveyor wheel shape / drive type: | Axial-flow rotor |
Seal type: | Sealless (SL) |
Thread (inch) outside: | 1" |
Type of drive: | Battery |
Output (W): | 260 |
Voltage (V): | 21,6 |
Capacity (Ah): | 4 |
Schlauchlänge (mm): | 1500 |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler