Motor: ME II 3 - 460W, 230V
Tauchtiefe: 1000 mm (Gleitringdichtung)
Suitable for residual emptying of containers with flammable and highly inflammable liquids and for use in potentially explosive environments
Examples of liquids:
e.g. acetone, conc. formic acid, ethyl acetate, butyl acetate, conc. acetic acid, nicotine, toluene, styrene, etc.
Features:
- Optimised drum residue emptying with remaining quantity of approx. 0.1 litres
- No grease filling in the pumping station
- With radial impeller = L (impeller) for higher heads
- Approved according to ATEX directive 2014/34/EU, category 1/2
Advantages:
- No problematic re-tipping for spreading remaining residues
- Maximum product utilization with reduced drum cleaning and disposal costs
- No leakage if the pumping station is tilted or moved
- No contamination of the pumped medium by lubricants
Pump set consisting of:
Motor, pumping unit RE-Niro 41-L-GLRD in stainless steel, 2 m universal chemical hose 3/4" electrically conductive integrated with hose connection stainless steel, nozzle stainless steel (1.4571), potential equalisation cable, drum adapter PP (without Ex-plug).
Optionally also available with Ex-plug completely mounted.
Suitable media: | Styrol, Äththylacetat, Essigsäure, Aceton, Ameisensäure, Butylacetat, Nikotin, Toluol |
Pump station material (material): | Niro (Edelstahl) |
Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
Mechanical seal (material): | Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571) |
Static seal (material): | FEP ummantelt |
Drive shaft (material): | Edelstahl (1.4571) |
Bearing (material): | Edelkohle |
Delivery rate (up to max. l/min)*: | 67, 77 |
Delivery rate with Nozzle (up to max. l/min)*: | 40, 45 |
Delivery head (up to max. mWS)*: | 14, 28 |
Fluid temperature (max °C): | 100 |
density (up to kg/dm³): | 1.6, 2.8 |
Operating pressure (max. bar): | lower than 6 bar |
Viscosity (up to mPas): | 500 (e.g. hydraulic oil), 1000 |
Type of drive: | Electric, Compressed air |
Output (W): | 460, 1000 |
Voltage (V): | 230 |
Operating pressure (max. bar): | lower than 6 bar |
Frequency (Hz): | 50 |
Protection type: | IP54 |
Immersion length (mm): | from 1000 mm, from 1500 mm |
Immersion tube diameter (up to mm): | 41 |
Conveyor wheel shape / drive type: | Radial-flow impeller |
Seal type: | Mechanical seal (MS) |
Thread (inch) outside: | 1 1/4" |
Certification: | Atex approval |
Version: | Unterspannungsauslöser |
Explosion protection: | explosion-proof |
Scope of delivery: | Motor ME II 3 oder Motor MD2xL, Pumpwerk RE-Niro 41-L-GLRD, 2 m Universal-Chemieschlauch 3/4”, Fassadapter PP, 2 m Potentialausgleichskabel, Zapfpistole in Edelstahl |
Schlauchlänge (mm): | 2000 |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler