Motor: ME II 3 - 460W, 230V
Immersion depth: 1000 mm (sealless)
Suitable for 200l drum emptying Undervoltage release
prevents unexpected start-up of the pump after power failure. Recommended
when pumping hazardous liquids.
conditionally safe to run dry
For highly flammable hydrocarbons
e.g. ethanol, petrol, butanol, isopropanol, kerosene, methanol, petroleum, etc.
properties:
- No grease filling in the pump station
- Motor optionally electric or pneumatic
- Handwheel for quick motor mounting/demounting and as carrying handle
- With radial impeller = L (impeller) for higher heads
- Approved according to ATEX directive 2014/34/EU, category 1/2
Advantages:
- No contamination of the pumped medium by lubricants
- Highly resistant noble carbon shaft bearing
Pump set consisting of:
Motor, pumping unit Niro 41-L-DL in stainless steel, 2 m solvent hose 3/4" electrically conductive integrated with hose connection brass, nozzle brass, potential equalization cable, barrel adapter PP (without Ex-plug).
Suitable media: | Petroleum, Methanol, Kerosin, Isopropanol, Butanol, Benzin, Ethanol |
Pump station material (material): | Niro (Edelstahl) |
Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
Mechanical seal (material): | no seals in contact with the medium |
Static seal (material): | no seals in contact with the medium |
Bearing (material): | Edelkohle |
Delivery rate (up to max. l/min)*: | 95, 124 |
Delivery rate with Nozzle (up to max. l/min)*: | 60 |
Delivery head (up to max. mWS)*: | 14, 35 |
Fluid temperature (max °C): | 100 |
density (up to kg/dm³): | 1.6, 2.8 |
Operating pressure (max. bar): | lower than 6 bar |
Viscosity (up to mPas): | 350 |
Immersion length (mm): | from 1000 mm, from 1500 mm |
Immersion tube diameter (up to mm): | 41 |
Conveyor wheel shape / drive type: | Radial-flow impeller |
Seal type: | Sealless (SL) |
Thread (inch) outside: | 1 1/4" |
Type of drive: | Electric, Compressed air |
Output (W): | 460, 1000 |
Voltage (V): | 230 |
Operating pressure (max. bar): | lower than 6 bar |
Frequency (Hz): | 50 |
Protection type: | IP54 |
Version: | Unterspannungsauslöser, Komfortgriff |
Schlauchlänge (mm): | 2000 |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler