Pump set solvent with residual discharge
for highly flammable hydrocarbons
- Order number: 0205-501
- Preis: upon request
- Info: is suitable for the Ex - area
Motor: ME II 3 - 460W, 230V
Immersion depth: 1000 mm (sealless)
Suitable for 200l drum emptying Undervoltage release
prevents unexpected start-up of the pump after power failure.
Recommended when pumping hazardous liquids.
For highly flammable hydrocarbons
e.g. ethanol, petrol, butanol, isopropanol, kerosene, methanol, petroleum, etc.
properties:
- Optimised drum residue emptying with remaining quantity of approx. 0.1 litres
- No grease filling in the pumping station
- With radial impeller = L (impeller) for higher heads
- Approved according to ATEX directive 2014/34/EU, category 1/2
Advantages:
- No problematic tipping to spread the remaining residue
- Maximum product utilization with reduced drum cleaning and disposal costs
- No leakage if the pumping station is tilted or moved
- No contamination of the pumped medium by lubricants
Pump set consisting of:
Motor, pump unit RE-Niro 41-L-GLRD in stainless steel, 2 m solvent hose 3/4" electrically conductive integrated with hose connection brass, nozzle brass, potential equalisation cable, drum adapter PP (without Ex-plug).
| Suitable media: | Petroleum, Methanol, Kerosin, Isopropanol, Butanol, Ethanol |
| Pump station material (material): | Niro (Edelstahl) |
| Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Mechanical seal (material): | Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571) |
| Static seal (material): | FEP ummantelt |
| Drive shaft (material): | Edelstahl (1.4571) |
| Bearing (material): | Edelkohle |
| Delivery rate (up to max. l/min)*: | 67, 77 |
| Delivery rate with Nozzle (up to max. l/min)*: | 40, 45 |
| Delivery head (up to max. mWS)*: | 14, 28 |
| Fluid temperature (max °C): | 100 |
| density (up to kg/dm³): | 1.6, 2.8 |
| Operating pressure (max. bar): | lower than 6 bar |
| Viscosity (up to mPas): | 500 (e.g. hydraulic oil) |
| Immersion length (mm): | from 1000 mm, from 1500 mm |
| Immersion tube diameter (up to mm): | 41 |
| Conveyor wheel shape / drive type: | Radial-flow impeller |
| Seal type: | Mechanical seal (MS) |
| Thread (inch) outside: | 1 1/4" |
| Type of drive: | Electric, Compressed air |
| Output (W): | 460, 1000 |
| Voltage (V): | 230 |
| Operating pressure (max. bar): | lower than 6 bar |
| Frequency (Hz): | 50 |
| Protection type: | IP54 |
| Version: | Unterspannungsauslöser |
| Schlauchlänge (mm): | 2000 |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler
