Design: with leakage detection
Seal type: mechanical seal (GLRD)
This extremely compact IBC pump is an interesting alternative when a conventional vertical drum pump cannot be used, e.g. for IBC containers or tanks that are stored on shelves.
In these cases, access from above is no longer possible, but the floor drain of the IBC can be used.
The horizontal container pump B200 is screwed directly to the floor drain of the container for emptying.
Examples of liquids:
Bromic acid, nitric acid, dimethylphthalate, potassium bromate, hydrofluoric acid, nitric acid, sulphuric acid, etc.
Properties:
- Centrifugal pump with axial impeller in compact design
- Direct connection to the floor drain of the IBC tank by means of a standard screw cap (S60 x 6)
- Variable drive concept (various universal and air motors)
- Significantly better hydraulic performance compared to hydrostatic discharge
Pump set consisting of:
Pump station B200 PVDF 41-R-GLRD, 2 m special chemical hose DN 19 with PVDF connection, PVDF nozzle, 5 m mains cable, 230 V, monitoring module SafetyBox
Suitable media: | Dimethylphthalat, Kaliumbromat, Bromsäure, Fluorwasserstoffsäure, Salpetersäure, Schwefelsäure |
Pump station material (material): | PVDF (polyvinylidene fluoride) |
Mechanical seal (material): | Carbon, SiC, FPM, HC-4 (2.4610) |
Static seal (material): | FPM (fluororubber) |
Drive shaft (material): | Hastelloy C (2.4610) |
Bearing (material): | ETFE / PTFE |
Delivery rate (up to max. l/min)*: | 216 |
Delivery head (up to max. mWS)*: | 16 |
Fluid temperature (max °C): | 100 |
density (up to kg/dm³): | 2.8 |
Viscosity (up to mPas): | 1000 |
Conveyor wheel shape / drive type: | Axial-flow rotor |
Seal type: | Mechanical seal (MS) |
Version: | Leckageerkennung |
Scope of delivery: | Pumpwerk B200 PVDF 41-R-GLRD, 2 m Spezial-Chemieschlauch DN 19 mit PVDF-Anschluss, Zapfpistole PVDF, 5 m Netzanschlussleitung, 230 V, Überwachungsmodul SafetyBox, Pumpwerk B200 PVDF 41-R-GLRD, 2 m Spezial-Chemieschlauch DN 19 mit PVDF-Anschluss, Zapfpistole PVDF |
Schlauchlänge (mm): | 2000 |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler