PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
MRC Global Belgium | Lutz Pompen
Family business since 1954
frederick.lippens@mrcglobal.com
+32 3 633 96 13

Pump Set - Mineral oils

for oils and cooling lubricants

Immersion depth:

Motor:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 0205-322
  • upon request
  • When used with diesel and similar liquids, the pump is only suitable at a fluid and ambient temperature < 40°C.
Description: The Pump Set is suitable for low viscosity, aggressive and non-flammable...more
Product information "Pump Set - Mineral oils"

Motor: MD2xL - 1000W, 6 bar, comfort handle (for higher flow rate, viscosity and density)
Immersion depth: 1200 mm (sealless)


Description:

The Pump Set is suitable for low viscosity, aggressive and non-flammable media. Perfectly suited for the removal or transfer of mineral oils.

  • Media examples: Diesel, heating oil, hydraulic oil, machine oil and engine oil etc.
  • Pump tube equipped with Lutz original hand wheel
  • Suitable for filling or transferring alternative fuels

Features & advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped medium by lubricants
  • Optimized Drum emptying
  • Universally resistant ETFE shaft bearings
  • Maintenance without special tools
  • Seal modules of the seal-less (DL) pump can be replaced
Technische Produktdaten
▼ MEDIUM ▼
Suitable media: Motoröl, Maschinenöl, Hydrauliköl, Heizöl, Diesel (<40°C)
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump station material (material): Alu (Aluminium)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): no seals in contact with the medium
Mechanical seal (material): no seals in contact with the medium
Bearing (material): ETFE
Drive shaft (material): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Delivery rate (up to max. l/min)*: 116
Delivery rate with Nozzle (up to max. l/min)*: 60
Delivery head (up to max. mWS)*: 36
Fluid temperature (max °C): 100
density (up to kg/dm³): 2.8
Operating pressure (max. bar): lower than 6 bar
Viscosity (up to mPas): 1000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Conveyor wheel shape / drive type: Radial-flow impeller
Seal type: Sealless (SL)
Immersion length (mm): from 1500 mm
Immersion tube diameter (up to mm): 41
Thread (inch) outside: 1 1/4"
▼ SCHLAUCH | HOSE | SLANG ▼
Schlauchlänge (mm): 2000
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Type of drive: Compressed air
Output (W): 1000
Version: Komfortgriff

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Set
1000 mm
Explosion protection
Pump Set - Solvent Pump Set - Solvent
for highly flammable hydrocarbons
Ex-protection
Electrical
Complete set
Pump Set - Explosive media Pump Set - Explosive media
for aggressive and highly flammable liquids
Service & Support

Sie brauchen Hilfe?

Hier finden Sie alle Möglichkeiten mit uns in Kontakt zu treten:

  +49 9342 879-0 (Zentrale)
  +49 9342 879-260 (Vertrieb)
  +49 9342 879-232 (After-Sales)

  Kontaktformular
  Angebot anfordern
  Reparatur-Service

  info@lutz-pumpen.de
  bewerbung@lutz-pumpen.de