
Version: without Volume preselection (Ex relay module)
Note: The Flow meter without volume preselection consists of the parts basic meter (measuring unit) and operating unit (display)
Description:
The first flowmeter with touchscreen display and backlight impresses with its simple, on-demand display and operability, multilingual interface and compact design. Due to the rotating swash plate and a magnet it enables the exact measurement of the volume flow and measures solvents, acids, alkalis, easily inflammable liquids, oils and neutral media precisely, quickly and above all efficiently. Optionally, the desired volume can be preselected with the volume preselection (relay module), so that the pump or the system switches off automatically after the selected volume. This further simplifies and secures the operation of the systems.
- Optionally with quantity preselection (relay module)
- Media examples: Methanol, petrol, isopropanol, kerosene, formic acid, acetic acid, acetone, styrene, xylene, toluene, etc.
- Mobile at a Drum pump or with dispenser connection or stationary in plant construction
Features & Advantages
- Measurement according to the swash plate principle
- High measuring accuracy
- Variable display orientation
- Touchscreen display with self-explanatory, multilingual user interface
- Measuring range from 10 l/min- 100 l/min
- Approved according to ATEX directive 2014/34/EU, category 2
Housing (material): | PPS (Polyphenylensulfid) |
Seals (material): | FEP |
Measuring chamber (material): | LCP |
Magnet: | PPS (Polyphenylensulfid) gekapselt |
Flow rates (up to l/min): | 100 |
Fluid temperature (max °C): | 60 |
Operating pressure (max. bar): | 4 |
Viscosity (up to mPas): | 2000 |
Messprinzip: | Taumelscheibe |
Connection: | Gewinde |
Inlet connection (inch): | 2" |
Outlet connection (inch): | 1 1/4" |
Messgenauigkeit kalibriert**: | ± 1% |
Explosion protection: | Yes |
Connection: | Gewinde |
Protection type: | IP55 |
Version: | ohne Mengenvorwahl |
Certification: | ATEX Richtlinie (ATEX Richtlinie 2014/34/EU) |
Type: | UN10 Ex |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler