without undervoltage release
Robust and powerful universal drive with double-walled housing.
Suitable for pumping aqueous to slightly viscous, aggressive and outgassing liquids as well as media with high specific weight.
- Robust and powerful
- Double-walled housing protects against corrosion of internal parts
- Externally ventilated 230V/50Hz, 795 W, protection class IP 54
Double pole on/off switch, splash-proof according to IP 54, single pole thermal overcurrent release. 5 m connection cable with earthing contact plug. Not explosion-proof. The handy and powerful universal motors MA II for ideal pumping of thin-bodied to slightly viscous, aggressive and non-flammable liquids.
Better safe than sorry
Robust and durable: The double-walled housing is made of aluminium on the inside and an acid-resistant special plastic on the outside. Aggressive and corrosive vapours cannot penetrate into the engine interior. The air flow for cooling the engine is conducted between the double-walled housing.
Safety and protection
A double insulation is fitted between the live parts and the touchable outer surface of the motor and the pumping unit.
|Type of drive:
|MA II 7-230
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter