
Delivery rate: 50 l/min.
Drive shaft: cardan shaft (GW)
Type of seal Packing gland
Note: No Ex-approval
Description:
The Eccentric screw pump B70V-SR 50.1 (with reduction gear) in the industrial version is suitable for conveying water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various compressed air and electric motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
- PTO shaft versions also available in special immersion depths of 500 - 2000 mm
- Pump tube equipped with Lutz original handwheel
- Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials
Features & Advantages
- Uniform volume flow
- Easy and fast cleaning
- Gentle, low-pulsation product conveying
- Low wear
- Ideal for mobile use
Pump station material (material): | Edelstahl (1.4571/1.4404) |
Static seal (material): | FPM (fluororubber) |
Drive shaft (material): | Edelstahl (1.4571) |
Stator (Werkstoff): | NBR hell (Nitrilbutadienkautschuk) |
Rotor (Werkstoff): | Edelstahl (1.4571) |
Stopfbuchse (Werkstoff): | PTFE (Polytetrafluorethylen) |
Delivery rate (up to max. l/min)*: | 50 |
Delivery head (up to max. bar)*: | 8 |
Fluid temperature (max °C): | 80 |
Viscosity (up to mPas): | 30000 |
Conveyor wheel shape / drive type: | Gelenkwelle (hochviskose Medien) |
Seal type: | Stopfbuchse |
Immersion length (mm): | 1100 |
Immersion tube diameter (up to mm): | 54 |
Statorgröße: | 50.1 |
Thread (inch) outside: | 1 1/2" |
Type of drive: | Electric, Compressed air |
Type: | B70V-SR |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler