
Delivery rate: 12 l/min.
Drive shaft: Cardan shaft (GW)
Type of seal : Stop bushing
Note: Optionally, stator size 25.2 (0173-254) can be selected to overcome higher delivery heads
Description:
The Eccentric screw pump B70V-D 12.1 in the industrial version is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, various three-phase and air motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
- Cardan shaft versions also available in special immersion depths of 500 - 2000 mm
- Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials
Features & Advantages
- Uniform volume flow
- Easy and fast cleaning
- Gentle, low-pulsation product conveying
- Low wear
- Ideal for mobile use
Pump station material (material): | Edelstahl (1.4571/1.4404) |
Static seal (material): | FPM (fluororubber) |
Drive shaft (material): | Edelstahl (1.4571) |
Stator (Werkstoff): | PTFE (Polytetrafluorethylen) |
Rotor (Werkstoff): | Edelstahl (1.4571) |
Stopfbuchse (Werkstoff): | PTFE (Polytetrafluorethylen) |
Delivery rate (up to max. l/min)*: | 12 |
Delivery head (up to max. bar)*: | 6 |
Fluid temperature (max °C): | 140 |
Viscosity (up to mPas): | 30000 |
Conveyor wheel shape / drive type: | Gelenkwelle (hochviskose Medien) |
Seal type: | Stopfbuchse |
Immersion length (mm): | from 1000 mm |
Immersion tube diameter (up to mm): | 54 |
Statorgröße: | 12.1 |
Thread (inch) outside: | 1 1/2" |
Type of drive: | Three phase |
Type: | B70V-D |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler