Eccentric screw pump B70H Industry
with trolley
- Order number: 0176-401 + 0208-194 + 0176-807
- Maße (mm): upon request
- Info: is not suitable for hazardous areas
Delivery rate: 25 l/min.
Note: With Tri-Clamp connection on discharge nozzle
Description:
The B70H is a modification of our B70V and is designed for horizontal use on a transport trolley. It can be used in situations where the B70V comes up against spatial or handling limits and thus rounds off our Eccentric screw pumps range with a mobile variant. The pump is suitable for pumping aqueous to highly viscous Newtonian and non- Newtonian media as well as media containing solids and shear-sensitive media. It is also used in explosion-proof zones for aggressive and highly flammable liquids with high delivery pressure.
- also available in explosion-proof design on request
- Horizontal version
- with stainless steel transport trolley
Features & Advantages
- Conveying possible at low room height
- No physical strain due to heavy lifting
- Mobility is given by the transport trolley
- Simple size change possible
- Easy handling of pumps with large weights
| Pump station material (material): | Edelstahl (1.4571/1.4404) |
| Static seal (material): | FPM (fluororubber) |
| Mechanical seal (material): | Kohle, CrMO-Guss, FPM |
| Drive shaft (material): | Edelstahl (1.4571) |
| Stator (Werkstoff): | PTFE (Polytetrafluorethylen) |
| Rotor (Werkstoff): | Edelstahl (1.4571) |
| Delivery rate (up to max. l/min)*: | 25 |
| Delivery head (up to max. bar)*: | 8 |
| Fluid temperature (max °C): | 140 |
| Viscosity (up to mPas): | 100000 |
| Conveyor wheel shape / drive type: | Gelenkwelle (hochviskose Medien) |
| Seal type: | Mechanical seal (MS) |
| Immersion length (mm): | 400 |
| Statorgröße: | 25.1 |
| Druckstutzen (DN): | 50 |
| Capacity (kW): | 1,5 |
| Protection type: | IP55 |
| Speed (1/min): | 900 |
| Type: | B70H |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter