Plug-in nipple

for the compressed air supply of the air motors and Double diaphragm pumps

Order number: 0372-045
Maße (mm): op verzoek
Info: a sealing ring (0314-309) is required for the compressed air supply on the air motors

Description: The brass push-in nipple is required for connection to the compressed air...more

Close menu

Product information "Plug-in nipple"

Nominal width: 7.2 mm
Type of connection: 3/8" external thread

Aansluiting: G 3/8 AG (NW 7.2)
voor Persluchtmotoren en DMP 1/4", 3/8", 1/2" en 1

Description:

The brass push-in nipple is required for connection to the compressed air hose, thus enabling a trouble-free compressed air supply.

Material: Brass

Properties & Advantages

Nominal widths: 7.2 and 10mm

Technische Produktdaten

Produktgruppe:

Fasspumpen / Containerpumpen, Membranpumpen

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Plug-in nipple

for the compressed air supply of the air motors and Double diaphragm pumps

Description:

Properties & Advantages

Sie brauchen Hilfe?