for the series ST10, SL10, LM10, UN10, VA10, HDO 080, HDO 120; HDO 200, HDO 250, HDO 400, HDO 500
The protective cover enables and protects the modules in case of decentralized installation of the relay module and / or the operating unit.
1 data socket / 2 data sockets
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Protection cover / Pulse converter
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Service & Support
Sie brauchen Hilfe?
Hier finden Sie alle Möglichkeiten mit uns in Kontakt zu treten: