Wall mount set
for the series ST10, SL10, LM10, UN10, VA10, HDO 080, HDO 120; HDO 200, HDO 250, HDO 400, HDO 500
Maße (mm):upon request
Info:The combination plate is not included in the wall bracket set.
The hiking bracket set is an additional bracket mounting. Installation is only possible together with a combination plate (0230-304).
for top-hat rails (TS 35) EN 50022
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Mounts / Suspensions
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter