Hose connection
with Tri-Clamp DN 50
- Order number: 0204-878
- Maße (mm): op verzoek
- Info: is suitable for eccentric screw pumps
Design: for hose DN 38 (1 1/2")
Seals: FPM
Material: Stainless steel (1.4404)
Description:
The hose connector with Tri-Clamp is required for connecting the delivery hose to the B70 eccentric screw pump, the discharge bend or the Tri-Clamp fittings (consisting of hose nozzle, closing clamp and seal).
- for eccentric screw pumps
Properties & advantages
- Material stainless steel (1.4404)
- for hoses with nominal diameter DN 38 / DN 50
| Produktgruppe: | Exzenterschneckenpumpen |
| Accessories group: | Hose connection / Hose clips |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter