Outlet bend

for mounting at the end of the hose (PURE version)

Order number: 0370-098
Maße (mm): op verzoek
Info: Suitable for pumping flammable and combustible liquids (e.g. ethanol, petrol) or in potentially explosive atmospheres.

Description: By mounting on the end of the hose, the discharge elbow allows liquids to be...more

Close menu

Product information "Outlet bend"

Material: Stainless steel (1.4301)
Nominal size: DN 32

Nominale diameter: Tri-Clamp DN 32

Description:

By mounting on the end of the hose, the discharge elbow allows liquids to be transferred or discharged directly into another container.

Material: stainless steel (1.4301)
Nominal widths: DN 32 / 40

Properties & advantages

Enables quick and direct transfer of liquids
Seal made of EPDM

Technische Produktdaten

Produktgruppe:

Exzenterschneckenpumpen

Accessories group:

Hoses / Discharge spouts / Suction pipe

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Outlet bend

for mounting at the end of the hose (PURE version)

Description:

Properties & advantages

Sie brauchen Hilfe?