for mounting on the pump outlet (PURE)
Maße (mm):upon request
Info:Suitable for pumping flammable and combustible liquids (e.g. ethanol, petrol) or in potentially explosive atmospheres.
By mounting on the pump discharge, the discharge elbow allows the liquids to be transferred or filled directly into another container.
Material: stainless steel (1.4571, 1.4404)
Nominal width: DN 50
Features & Advantages
Enables fast and direct transfer of liquids
Seal made of EPDM
incl. gasket and clamp
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Hoses / Discharge spouts / Suction pipe
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Service & Support
Sie brauchen Hilfe?
Hier finden Sie alle Möglichkeiten mit uns in Kontakt zu treten: