Drum pump Lutz B2 Vario PP

for low viscosity acids

Order number: 0201-500
Maße (mm): on request
Info: not suitable for flammable liquids

Description: The B2 Vario barrel pump is suitable for thin-bodied, aqueous to slightly...more

Close menu

Product information "Drum pump Lutz B2 Vario PP"

Immersion depth: 500 mm (sealless)

Description:

The B2 Vario barrel pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for the removal of small containers such as canisters, hobbocks and drums. The pump is flexible at all times and thus conserves important resources.

infinitely variable speed controller for transferring and filling small quantities

Features & Advantages

seal-less design (DL) conditionally dry-running safe
infinitely variable
powerful motor with improved service life
easy to service and dismantle

Technische Produktdaten

Suitable media:

Akkusäure, Ammoniakwasser, Fotoentwickler, Fotofixierer, Glykol, Phosphorsäure, Salzsäure, Wasserstoffperoxid

Pump station material (material):

PP (polypropylene)

Impeller (material):

PP (polypropylene)

Static seal (material):

no seals in contact with the medium

Mechanical seal (material):

no seals in contact with the medium

Bearing (material):

ETFE / PTFE

Drive shaft (material):

Hastelloy C (2.4610)

Delivery rate (up to max. l/min)*:

Delivery head (up to max. mWS)*:

Fluid temperature (max °C):

density (up to kg/dm³):

1.3

Viscosity (up to mPas):

300

Conveyor wheel shape / drive type:

Axial-flow rotor

Seal type:

Sealless (SL)

Immersion length (mm):

up to 500 mm

Immersion tube diameter (up to mm):

Thread (inch) outside:

Type of drive:

Electric

Output (W):

200

Voltage (V):

230

Frequency (Hz):

Protection type:

IP24

Version:

mit Drehzahlsteller

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter