Flow meter TS type ST10

for mineral oils and low-viscosity media

Order number: 0231-000
Maße (mm): upon request
Info: The Flow meter without quantity preselection consists of the parts basic counter (measuring unit) and operating unit (display)

Description: The first flowmeter with touchscreen display and backlight impresses with its...more

Close menu

Product information "Flow meter TS type ST10"

Version: without Volume preselection (relay module)
Note: The connection to the Pump tube or the system is made with a thread

Description:

The first flowmeter with touchscreen display and backlight impresses with its simple, on-demand display and operability, multilingual interface and compact design. Due to the rotating swash plate and a magnet, it enables the precise measurement of the volume flow and measures low to medium viscosity media such as water and mineral oils precisely, quickly and above all efficiently. Optionally, the desired volume can be preselected with a volume preselection (relay module), so that the pump or the system switches off automatically after the selected volume. This further simplifies and secures the operation of the systems.

Optional with quantity preselection (relay module)
Media examples: Water, oil, diesel, heating oil, hydraulic oils etc.
Mobile at a Drum pump or with dispensing gun connection or stationary in the plant construction

Features & Advantages

Measurement according to the swash plate principle
High measuring accuracy
Variable display orientation
Touchscreen display with self-explanatory, multilingual user interface
Measuring range from 10 l/min- 100 l/min
Simple operation

Technische Produktdaten

Housing (material):

PPO (Polyphenylenether)

Seals (material):

FPM (fluorinated rubber)

Measuring chamber (material):

PPO (Polyphenylenether), PPS (Polyphenylensulfid)

Magnet:

Polyamide (PA), Edelstahl (1.4401)

Flow rates (up to l/min):

100

Fluid temperature (max °C):

Operating pressure (max. bar):

Viscosity (up to mPas):

2000

Messprinzip:

Taumelscheibe

Connection:

Gewinde

Inlet connection (inch):

Outlet connection (inch):

1 1/4"

Messgenauigkeit kalibriert**:

± 1%

Connection:

Gewinde

Protection type:

IP55

Version:

ohne Mengenvorwahl

Type:

ST10

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter