Description:
The Eccentric screw pump HD-E-SR in the industrial version transfers the advantages of the Drum pump for viscous media quite simply to the highly viscous range. The positive displacement pump has an easily detachable outer tube, a bearing head with Mechanical seal and a free-running shaft with an eccentric screw as conveying element - all easy to dismantle and clean. Due to the small outer diameter of the pump tube of max. 41 mm, viscous liquids up to 30,000 mPas can be filled. The Pump tube can be suitably combined with our electric or air motors. This ensures the emptying of the liquids and thus saves important resources.
- also available in special immersion depths
- Pump tube equipped with Lutz original hand wheel
- Media examples: Oils, glucoses, waste oils, disposal liquids,
Features & Advantages
- Optionally driven by electric or pneumatic motors
- Uniform volume flow
- Light and versatile due to low motor weight
- Continuous, low-pulsation delivery of up to 15 litres/min
- Low wear
- Easily detachable outer tube
Pump station material (material): | Edelstahl (1.4571) |
Static seal (material): | FPM (fluororubber) |
Mechanical seal (material): | Kohle, SiC |
Drive shaft (material): | Edelstahl (1.4571) |
Stator (Werkstoff): | PTFE (Polytetrafluorethylen) |
Delivery rate (up to max. l/min)*: | 17 |
Delivery head (up to max. bar)*: | 6 |
Fluid temperature (max °C): | 100 |
Viscosity (up to mPas): | 30000 |
Seal type: | Mechanical seal (MS) |
Immersion length (mm): | from 1000 mm |
Immersion tube diameter (up to mm): | 41 |
Thread (inch) outside: | 1 1/4" |
Type of drive: | Electric, Compressed air |
Type: | HD-E-SR |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter