Mit * gekennzeichnete Felder sind Pflichtfelder.
MRC Global Belgium | Lutz Pompen
Family business since 1954
+32 3 633 96 13
Elektromotor, Universalmotor für LUTZ Fasspumpe, ex-geschützt, 930 W

Universal motor ME II 8


Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 0050-042
  • upon request
  • The Atex guidelines can only be complied with if a Pump tube with an explosion-proof Motor is used for highly flammable liquids.
Explosion-proof universal actuator with double-walled housing for conveying flammable and...more
Product information "Universal motor ME II 8"

with undervoltage release

Explosion-proof universal actuator with double-walled housing for conveying flammable and highly flammable media. Approved according to ATEX directive 2014/34/EU

  • Explosion-proof according to II 2 G Ex db eb IIC T5 or T6
  • Two protection classes (I and II) = highest safety standard
  • 230V/50Hz, 930 W, protection class IP 54

Explosion-proof according to II 2 G Ex db eb IIC T5 or T6. Double pole on/off switch, splash-proof according to IP 54, double pole thermal overcurrent release. 5 m connection cable with safety plug (not explosion-proof), optionally with explosion-proof plug.
These motors cannot be easily disengaged. The explosion-proof ME II universal motors are the patent answer - German patent DE 38 15427 C2 - for pumping many low-viscosity, highly flammable, combustible media.

Here too: Twice as good
The double-walled housing is made of aluminium on the inside and an acid-resistant and non-conductive special plastic on the outside. This prevents corrosive vapours from penetrating into the engine interior. The air flow for engine cooling is conducted between the double-walled housing.

Tested quality and safety
Conforms to the standards EN/IEC 60 079-0, EN/IEC 60 079-1 and EN/IEC 60 079-7, explosion-proof according to II 2 G Ex db eb IIC T5 or T6 and built and approved according to the current explosion protection guidelines Atex 2014/34/EU and IEC Ex.

No fear of tension
All motors of the ME II series have a protective conductor connection. A double insulation is fitted between the live parts and the touchable outer surface of the motor and the pumping station. This guarantees protection against discharge sparks when establishing equipotential bonding, especially in hazardous areas.

Technische Produktdaten
Explosion protection: Yes
Type of drive: Electric
Output (W): 930
Voltage (V): 230
Frequency (Hz): 50
Version: ohne Unterspannungsauslöser
Certification: ATEX Richtlinie (ATEX Richtlinie 2014/34/EU)
Type: ME II 8-230

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Here yoll find all files for this article. mehr
Titel Beschreibung Dateiname Aktion
08 Motors Electric motors - Serie ME II Operating Manuals 0698-020_Motor_ME_II_de_en.pdf
Service & Support

Sie brauchen Hilfe?

Hier finden Sie alle Möglichkeiten mit uns in Kontakt zu treten:

  +49 9342 879-0 (Zentrale)
  +49 9342 879-260 (Vertrieb)
  +49 9342 879-232 (After-Sales)

  Angebot anfordern