Pump tube Niro for residual drainage

for flammable liquids

Order number: 0151-156
Maße (mm): upon request
Info: For highly flammable liquids, a Pump tube with an explosion-proof Motor must be used, because otherwise the ATEX directives cannot be complied with.

Description: The Lutz Pump tube for residual emptying (Niro) is suitable for...more

Close menu

Product information "Pump tube Niro for residual drainage"

Immersion depth: 700 mm
Type of seal: mechanical seal (GLRD)

Description:

The Lutz Pump tube for residual emptying (Niro) is suitable for low-viscosity, flammable and explosive liquids. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources.

also available in special immersion depths from 200 - 2500 mm
Pump tube equipped with Lutz original hand wheel
Suitable for Drum emptying alternative fuels, oils, flammable liquids

Features & Advantages

Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum residue emptying with remaining residual quantity of approx. 0.1 litre
No leakage in case of inclined position or repositioning of the pumping unit
Maximum product utilisation with reduced drum cleaning and disposal costs
Sealing module of the mechanical seal (GLRD) pump can be replaced

Technische Produktdaten

Pump station material (material):

Niro (Edelstahl)

Impeller (material):

ETFE (ethylene-tetrafluorethylene copolymer)

Static seal (material):

FEP ummantelt

Mechanical seal (material):

Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571)

Bearing (material):

Edelkohle

Drive shaft (material):

Edelstahl (1.4571)

Delivery rate (up to max. l/min)*:

Delivery head (up to max. mWS)*:

Fluid temperature (max °C):

100

density (up to kg/dm³):

1.9

Viscosity (up to mPas):

950

Conveyor wheel shape / drive type:

Radial-flow impeller

Seal type:

Mechanical seal (MS)

Immersion length (mm):

from 500 mm

Immersion tube diameter (up to mm):

Thread (inch) outside:

1 1/4"

Explosion protection:

Yes

Certification:

ATEX Richtlinie (ATEX Richtlinie 2014/34/EU)

Type:

RE Niro 41-L-GLRD

* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt.

** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler

Here yoll find all files for this article. mehr

Close menu